May 18th, 2010


Stuck Drums..

The spider Right front drum, and left rear, are hopelessly stuck. Frustratingly enough they both spin, but I believe they are hanging up either via the wheel bearing on the spindle or via small annular grooves on the shoes. The front left shoe was deeply scored, so that might make sense.

Anyhow, after a few days and multiple attempts to get the fargin thing loose I’ve broken down and asked “uncle Jaan” for guidance and advice..

This is the new plan of action:

Slide hammer on the wheel studs, along with acetylene heat where needed..

Its amazing how this hang-up has effected progress (negatively). I really hope the prescription works and I can get back on the fast track.

Wish me luck y’all.




One Response

  • Man I have felt your pain. Persistence will pay off, but I know the setback is the last thing you want.

    Aren’t you trying to get the drums off the hub? It sounds like you’re trying to remove the whole assembly. If the drums are spinning then they’re likely stuck at the studs. Lotsa PB blaster and be sure the shoes are adjusted as far away from the drum as possible. If the drums are worn like the one you did get off, it’s possible it’s formed a channel of sorts that’s holding the shoes captive. Just a thought – good luck man.



Leave a Reply